Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Edinburg Homeowners
A broken garage door in Edinburg usually makes itself known at the worst moment: you’re backing out for work and the door stops halfway, or the opener hums and nothing moves. We’re Covenant Garage Door Repair, and garage doors are all we do. No plumbing sidelines, no handyman guesswork. Our technicians have up to experience, and a strong local reputation built on showing up, diagnosing the actual problem, and quoting the price before any work begins. Same-day service is often available across Edinburg, and the estimate is free. Call (866) 389-4630 and we’ll get you moving again.
Garage Door Spring Repair
Garage Door Spring Repair is the work of replacing the torsion or extension springs that carry the door’s weight, and it’s the most common repair we handle in Edinburg. When a spring snaps, the door becomes dangerously heavy and usually won’t lift at all. We replace the failed spring and check the balance of the whole assembly, because a door running on one tired spring wears out the opener and cables faster. Typical spring repair in Edinburg runs $180-$340 for one spring. Matched pairs are usually replaced together, so a pair costs about twice that range. The written estimate sets the final price, and it’s agreed before we start.
Recognizing a Failed Spring
A loud bang from the garage, a door that lifts a few inches and stops, or a visible gap in the coil all point to a broken spring. Don’t try to force the door open by hand; on a snapped spring it can drop fast.
Why We Replace in Pairs
Springs on the same door wear at the same rate, so the second one is usually close behind the first. Replacing both at once saves you a second repair visit and keeps the door balanced.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Sensor Repair
Garage Door Sensor Repair fixes the safety beam that tells the opener the doorway is clear, and it’s the answer when a door reverses for no obvious reason or refuses to close at all. The two photo-eye units sit a few inches off the floor on each side of the opening, and they’re easy to knock out of alignment with a trash can, a bike, or a car bumper. We realign the eyes, test the wiring back to the opener, and replace a failed sensor when that’s the real cause. Sensor work is typically priced within our $150-$600 garage door repair range, depending on what we find, and the estimate is free.
Misalignment Versus Failure
Most sensor problems are alignment, not dead parts. A steady indicator light usually means the beam is blocked or off-aim, while a flickering or dark light points to wiring or a failed unit.
Why Sunlight Interferes
South Texas sun hitting a sensor lens can blind it, so a door that only misbehaves at certain times of day is telling you something. We check for sun exposure and adjust the angle or shielding so it stops recurring.
Emergency Garage Door Repair
Emergency Garage Door Repair is for the situations that can’t wait: a door stuck open with the house exposed, a door off its track leaning against the frame, or a vehicle trapped inside. In Edinburg, summer heat and sudden storms both put stress on door hardware, and a door that jams during either is more than an annoyance. We prioritize these calls, secure the door first, then repair it properly. Emergency repair typically falls within the $150-$600 range, set per job by the written estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Doors Off the Track
A door with rollers out of the track needs to be stabilized before anything else. Don’t run the opener; it will bend panels and turn a track fix into a replacement.
When the Door Won’t Close
A door stuck open overnight is a security problem. We can often get it closed and latched on the first visit, then return with the right parts for a full repair.
Garage Door Panel Replacement
Garage Door Panel Replacement swaps out a single damaged section instead of the whole door, which keeps the cost down when the damage is localized. Dents from a backed-in car, a cracked bottom panel from water sitting on the threshold, or a section bent by a failed opener are the usual reasons. We match the panel profile and color as closely as the manufacturer allows, then check that the door still balances and seals. Most single-panel replacements in Edinburg run $250-$500, depending on the door style and whether the panel is still in production. Clopay and Amarr panels are common here, and we work with both.
Matching an Older Door
Older panel profiles get discontinued, and a near-match is sometimes the only option. We’ll tell you honestly when a close match will show and when it won’t.
Panel Damage Versus Structural Damage
A dented face panel is cosmetic and easy. A bent section near a hinge or track often means the whole door is out of square, and that’s a different repair.
Garage Door Maintenance
Garage Door Maintenance is the tune-up that keeps a working door from becoming a repair bill, and it’s worth doing once a year in Edinburg’s dusty, hot conditions. Grit works into the rollers and hinges, lubricant dries out, and the door slowly gets harder for the opener to lift. Our maintenance visit includes lubricating the moving parts, checking the spring tension and balance, testing the safety reverse, tightening hardware, and inspecting cables for fraying. It’s a modest job priced per visit by the estimate, not an upsell. If we find a part that’s close to failing, we tell you and let you decide.
What a Tune-Up Covers
We lubricate hinges, rollers, and the torsion bar, then run the door by hand to feel for binding. We test the safety reverse with a block and check that the sensors trip cleanly.
How Often to Schedule
Once a year suits most homes. If your door cycles many times a day, or you notice it getting louder, twice a year is reasonable.
Garage Door Roller Replacement
Garage Door Roller Replacement swaps the small wheels that ride in the track, and it’s the fix when a door shudders, squeals, or scrapes on its way up. Rollers wear flat spots and lose their bearings over time, and a seized roller can jump the track entirely. We replace all the rollers as a set so the door runs evenly, then clean and inspect the track. Roller replacement in Edinburg typically runs $110-$220. It’s one of the smaller jobs we do, and it often makes a door feel new again.
Noise and Vibration
A door that rumbles or shakes the wall is usually telling you the rollers are worn. New rollers quiet it down and reduce strain on the opener.
Nylon Versus Steel
Nylon rollers run quieter and last well in most homes. We’ll recommend the type that fits your door and how often it gets used.
Commercial Garage Door Repair
Commercial Garage Door Repair keeps a business’s overhead door working, and it follows different rules than a home job. These doors are bigger, heavier, and often on a schedule the business can’t afford to lose, so a stuck door can mean a loading bay that’s out of service. We handle commercial springs, operators, tracks, and panel damage, and we diagnose what failed before quoting. Commercial work is priced per job by the written estimate; the typical range for a repair runs $150-$600 depending on the parts involved. We answer 24/7 for the call.
Roll-Up and Sectional Doors
Roll-up doors and sectional doors fail in different ways, and the fix isn’t the same. We service both and know where each one wears out first.
Minimizing Downtime
The priority is getting the door operational. We’ll secure it, identify the failure, and give you a clear plan and price before touching a part.
Garage Door Cable Repair
Garage Door Cable Repair replaces the steel lift cables that run from the bottom corners up to the spring system, and it’s needed the moment a cable frays, snaps, or slips off its drum. A loose cable lets the door drop unevenly, which can bend a track and take the whole door out of service. We replace both cables as a pair, respool them correctly, and check the springs at the same time since they share the load. Cable repair in Edinburg typically runs $130-$250. It’s a job that needs a trained hand; cables are under serious tension.
Signs of Cable Wear
Look for frayed strands, a slack cable hanging off the drum, or a door that lifts crookedly. Any of these means stop using the opener and call.
Safety Around Cables
Lift cables are under heavy tension and can cause serious injury, so this isn’t a repair to attempt yourself. We handle it with the proper tools and a controlled release.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service Genie and Chamberlain opener systems and know where each one wears out first, from the drive gear to the logic board. Genie units tend to run long but need their rail and travel settings checked as they age, while Chamberlain openers often call for limit switch and safety sensor attention before anything else fails.
On the door side, we work with Clopay and Amarr panels and hardware, and we know which profiles still match an older door and which ones don’t. Wayne Dalton is another brand we see regularly, and its proprietary hardware means genuine diagnosis rather than a generic guess. Whether you have Genie, Chamberlain, Clopay, Amarr, Wayne Dalton, or any other make, we can help.
Signs You Need a Pro Right Now
- A loud bang from the garage. That’s usually a broken torsion spring, and the door will be too heavy to lift safely. Stop using the opener and call us.
- The door reverses before it closes. A sensor out of line or a blocked beam is the usual cause, but it can also be a failing opener board. Either way, it needs a proper test.
- Frayed or slack cables. A cable on its last strands can snap under load. Don’t run the door; get it inspected.
- A door that lifts crooked or binds. Uneven travel points to a worn roller, a cable issue, or a door out of balance. Left alone, it bends panels and tracks.
- Grinding, squealing, or shuddering. Noise means friction, and friction wears metal. A tune-up now is cheaper than a repair later.
Our Process, Step by Step
- 1
You call, we listen. We ask what the door is doing and take down the basics so the technician arrives with a head start. If it’s unsafe to use, we’ll tell you how to secure it.
- 2
On-site diagnosis. We test the door by hand, check the springs, cables, rollers, and track, and test the opener and sensors with a meter where needed. No guesswork.
- 3
A written estimate before any work. You get the price in writing, with the parts and labor clear. Nothing starts until you agree to it.
- 4
The repair. We use the right parts for your door’s brand and model, and we keep the work area clean. If we find something else that needs attention, we show you and let you decide.
- 5
A final test with you watching. We run the door, test the safety reverse, and confirm the balance. You see it working before we leave.
How Much Does Garage Door Repair Cost in Edinburg?
Garage door repair in Edinburg typically runs $150-$600, and the exact figure depends on which part failed and how much of the system it took with it. A typical spring repair runs $180-$340 for one spring, while a matched pair costs about twice that. A snapped cable usually lands around $130-$250, roller replacement runs $110-$220, and sensor work falls within the general repair range. Panel replacement sits at $250-$500 when the panel is still available. Track realignment is usually $120-$240, and opener repair is $120-$320.
What moves the price: the type and size of the door, whether parts are still in production, and whether a single failure damaged something else. A snapped spring left running on the opener often burns out the gears too, which is why one problem becomes two. Avoid overpaying by asking for the estimate in writing before work starts, and by getting the diagnosis explained, not just a number. A free estimate from us includes the on-site diagnosis, a written itemized price, and a clear explanation of what failed. The written estimate sets the final price. Call (866) 389-4630 for yours.
Our Service Area Near Edinburg
We handle garage door repair across Edinburg and the towns around it, including Elsa, Olivarez, Edcouch, Midway North, Mila Doce, La Villa, Scissors, Weslaco, Indian Hills, Salida del Sol Estates, and Llano Grande. Most calls in the Edinburg area get a fast response, and same-day service is often possible. If you’re in a nearby town, check our garage door repair page for that area, or call and we’ll confirm coverage.
Serving Edinburg, TX – Our Local Coverage Area
We serve Edinburg and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Repair in Edinburg
Garage door repair is fixing the parts that make a door open and close safely: springs, cables, rollers, tracks, panels, sensors, and the opener itself. It isn’t a replacement unless the door is beyond saving, and most problems are a single failed part. At Covenant Garage Door Repair, every job is a garage door job, so the diagnosis is specific rather than general. Call (866) 389-4630 for an exact quote; estimates are free.
Most repairs take between one and two hours on site. A spring or cable replacement typically runs about an hour, while panel replacement or opener work can take longer depending on parts. We give you a realistic time frame with the estimate, not a guess.
Garage door repair in Edinburg typically runs $150-$600, with spring repair at $180-$340 for one spring, cable repair at $130-$250, and roller replacement at $110-$220. The written estimate sets the final price, and it’s agreed before work starts. Call (866) 389-4630 for an exact quote; estimates are free.
Yes. We service Genie, Chamberlain, LiftMaster, Craftsman, and other opener brands, and opener repair is a standalone service we specialize in. We diagnose the actual failure rather than replacing the whole unit by default. Call (866) 389-4630 for an exact quote; estimates are free.
Same-day service is often available in Edinburg. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (866) 389-4630 and we’ll tell you what’s available.
We stand behind our work, and warranty terms are confirmed on the written estimate for your specific job. Our name is Covenant, and we treat it as a promise. Ask us about the warranty on the parts and labor for your repair, and we’ll spell it out before we start.
Clear the floor in front of and under the door so the technician has room to work. Move vehicles out of the garage bay, and if the door is stuck open, leave it alone rather than forcing it. Keep pets and kids out of the work area. That’s it; we handle the rest.
Schedule Your Garage Door Repair Service in Edinburg Today
When your garage door quits in Edinburg, you want a specialist who shows up, finds the real problem, and quotes it in writing before any work starts. Garage doors are all we do, and our name is a promise we stand behind. Call (866) 389-4630 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Covenant Garage Door Repair.